Simex SRP-73, User Manual

Page: 52 / 56

User manual - METER SRP-73
Parameter Description Default value User's value
Desc.
page
Hi r Extension of the top of the nominal input range 5.0 (%) 29
Display parameters
bri Display brightness bri6 30
Signalization via colour of the display (“CoL” menu )
SCoL Basic colour of the display grEE 30
C r1 Change display colour after R1 is activated oFF 30
C r2 Change display colour after R2 is activated oFF 30
C AL Change display colour after alarm occurs oFF 30
C Pr
Enable additional threshold while signalisation via
colour
oFF
30
dir
The direction of result changes activating change of
display colour
morE
30
SEtP Threshold of display colour control 500 31
HySt Hysteresis of display colour control 0 31
CrES
Enable the use of local keyboard for
acknowledgement of display colour signalisation.
oFF
31
Configuration of peaks detection function (“HOLd” menu)
modE Kind of detected changes norm 31
PEA Minimum detected change 0.0 31
timE Maximum time of peak displaying 0.0 31
HdiS The type of displayed value HOLd 31
H r1 Source of relay R1, and LED R1 control rEAL 31
H r2 Source of relay R2, and LED R2 control rEAL 31
Settings of access to the configuration parameters (“SECu” menu)
A r1
Permission to changes of relay R1 threshold
without of the user password knowledge
on
32
A r2
Permission to changes of relay R2 threshold
without of the user password knowledge
on
32
RS 485 interface configuration (menu “rS”)
Addr Device address 0 32
bAud Baud rate 9.6 32
mbAc Permission to changes of configuration registers on 32
mbtO Maximum delay between received messages 0 32
rESP Additional delay of answer transmission Std 32
Configuration of numerical parameters edition
Edit Numerical parameters edit mode dig 33
52