User manual for flow meter with pulse input SPI-94
Figure 4.11. Example of OC-type outputs connection
Figure 4.12. Example of current outputs connection
(for device with current output only)
4.4.
MAINTENANCE
The unit does not have any internal replaceable or adjustable components available to
the user. Pay attention to the ambient temperature in the room where the unit is operating.
Excessively high temperatures cause faster ageing of the internal components and shorten the
fault-free time of unit operation.
In cases where the unit gets dirty do not clean with solvents. For cleaning use warm water with
small amount of detergent or in the case of more significant contamination ethyl or isopropyl
alcohol.
Using any other agents can cause permanent damage to the housing.
Product marked with this symbol should not be placed in municipal waste. Please
check local regulations for disposal and electronic products.
14
!
5 6
Uo
10 11
OC1
- +
+ -
+
voltage input
24 V
-
Logic controller
5 6
Uo
10 11
OC1
- +
+ -
R
2k2
LED 10 mA
+
current input
4-20 mA
-
Logic controller
3 4
optional ACTIVE
current output
-
+
