34
1 MAIN WARNINGS
The.instruction.manual.is.an.integral.part.
of.the.product.and.must.be.delivered.to.the.
user.. Carefully. read. the. warnings. contai-
ned.in.the.manual.on.installation,.use.and.
maintenance. of. the. appliance.. Carefully.
store.the.manual.for.future.reference.
Installation.must.be.carried.out.by.qualified.
personnel.in.compliance.with.the.standards.
in.force.and.following.the.instructions.pro-
vided. by. the. manufacturer.. Improper. in-
stallation.can.damage.persons.or.objects,.
which.the.company.is.not.responsible.for.
Ensure.that.the.product.is.intact..In.case.of.
doubt,.do.not.use.the.appliance.and.contact.
the.supplier..Packaging.components.must.
be.disposed.of.in.compliance.with.the.stan-
dards.in.force.
Before. any. maintenance. operation. on. the.
appliance,. disconnect. the. power. supply.
using.the.system.switch.
In.case.of.failure.or.malfunction,.deactivate.
the.appliance.avoiding.any.repair.or.direct.
intervention...Only.refer.to.qualified.techni-
cal.personnel..Any.repair.must.be.carried.
out.by.using.original.spare.parts.only.
Failure.to.comply.with.that.above.can.com-
promise.the.integrity.of.the.system.and.sin-
gle. components,. being. a. potential. danger.
for.the.user’s.safety,.which.the.company.is.
not.responsible.for.
Maintenance of the appliance and chimney
is required at least once a year.
2 SUPPLY
As.indicated.in.fig..1,.the.boiler.is.supplied.
in.two.different.packaging:
–. Cast.iron.boiler.body.with.flue.gas.cham-
ber. and. adjusting. dampers,. ash. collec-
ting.tray.and.draught.thermostatic.regu-
lator..A.bag.containing:.2.handles.for.the.
ports,.one.screw.with.bakelite.knob.for.
manually.adjusting.the.air.gate.dumper,.
a. contact. spring. for. the. thermometer.
bulb.and.a.M6.lever.to.be.fastened.to.the.
air.gate.dumper..“Test.report”.and.“De-
claration.of.conformity”.to.be.stored.to-
gether.with.the.documents.of.the.boiler.
–. Carton. packaging. with. casing,. thermo-
meter.and.document.kit..The.document.
kit. includes:. instruction. manual,. war-
ranty. certification,. BOILER. TECHNICAL.
DATA.plate.and.label.module.to.apply.on.
the.declaration.of.conformity.
ATTENTION: The BOILER TECHNICAL
DATA plate included in the document kit is
adhesive and must be applied on a side of
the casing by the installer.
The serial number of the iron case body is
indicated on the riveted plate on the rear
upper side of the body.
To facilitate transport, the load and drain
of the boiler are placed on the upper side
and are equipped with lifting hooks.
1
2
Fig..1
