Volum
ION
_UM_9752060610_NL_D_GB_F_V2_0 40
5.7. Fitting air filters
The air inlets of the VolumION can be fitted with air filters. The inlet grates with air controllers
must be removed to do this. The air flow of a VolumION with air filters cannot be adjusted. The
screws and the rings on the inlets are used to fit the filters.
Air filters can be obtained from the agent in your region or from SIMCO (Nederland) B.V.
See the spare parts list for the article number.
Figure 7: Fitting the air filter
- Unscrew the wing nut and air controller from the blower.
- Unscrew the four screws that are used to fix the grate from the blower.
Keep the screws to fit the filter.
- Remove the grate.
- Attach the filter housing and the ring to the VolumION with the four screws from the grate.
- Place the grate in the filter housing.
- Place the filter mat on the grate in the filter housing with the solid side and printed surface
facing inwards.
- Place the filter holder on the filter housing and turn to the right to lock it.
Filter holder
Grate
Filter
housing
Screws
Filter mat
Ring
Screws
Wing nut
Air controller
Grate
