6
C3X LINK
7
Source list
F1/F2 keys
Source info
OSD Backgroung
OSD Position
OSD Timeout
Language
-ENU
English
Zoom
Focus
Magnification
Blank
Colour temperature
Gamma correction
F1 F2
Fig.2
9
Zoom
To enter the optical ottico area where the
◀
and
▶
keys are
used to decrease or increase the surface area of the projected
image.
Focus
Once selected, the
◀
and
▶
keys are used to focus the ima-
ge.
Magnification
Activates the electronic zoom, the
◀
and
▶
keys control image
magnification. If the key is pressed a second time you will ac-
tivate PAN mode in which the
◀
,
▶
,
▲
and
▼
keys enable you to
pan over the magnified image.
Blank
Switches off the video signal and displays a black page . As
soon as the key is pressed an OSD indication lasting a few se-
conds confirms that the function has been activated. Pressing
any further keys on the remote control restores the previous
conditions.
Color Temperature
Successive pressing of the key in question (F1 or F) makes it
possible to select from among the different grid values. Use
the
▲
and
▶
keys to move along the vertical lines
(Fig.22)
, the-
reby keeping the colour temperature constant but moving
away from the curve of the black body. The
◀
and
▶
keys, on
the other hand, are used to select the various colour tempe-
ratures (movement along the horizontal lines of the grid).
Gamma Correction
Successive pressing of the key in question (F1 or F) makes it
possible to select from among the available gamma curves.
Browse through the different values also by using the
◀
and
▶
keys.
StandBy
Used to assign the F1 or F key (or both) with the standby fun-
ction, i.e. switching off. This is useful if you want to use a home
automation device based on IR signals requiring separate
commands for switching on and off.
SOURCE INFORMATION
When active (YES) each time the source is changed information
is displayed relative to the signal type. When disabled (NO) no
information is displayed relative to the selected source.
OSD BACKGROUND
Determines the type of background for the
On Screen Di-
splay
.
OSD TIMEOUT
Use this adjustment to set the display time after which the
On
Screen Display
will disappear. The
◀
(decrease) and
▶
(increa-
se) keys set the timing (within a 5-60 second timeframe).
OSD POSITION
Allows the
On Screen Display
to be positioned in a particular
area of the projected image. The OSD can be positioned using
the arrow keys for fine adjustments or keys 1...9 on the remote
control to select one of 9 preset positions.
ON-SCREEN MENU