CRYSTAL4-SH
User Guide
7
WARNING - Important Safety Instruction
1.
This projector is a Class 1 laser device that conforms with IEC 60825-1:2014 –
product risk group 2. Complies with CFR 1040.10 and 1040.11 except for
conformance as a Risk Group 2 LIP as defined in IEC 62471-5:Ed. 1.0. For more
information see Laser Notice No. 57, dated May 8, 2019
2.
Class 1 laser product, do not stare into beam. The bright light may result in
permanent eye damage, when the projector is on, RG2 IEC 62471-5:2015.
3.
This projector has built-in laser module. Disassembly or modification is very
dangerous and should never be attempted.
4.
Do not open or disassemble the projector as this may cause damage by the
exposure of laser radiation. Any operation or adjustment not specifically
instructed by the user's guide creates the risk of hazardous laser radiation
exposure.
5.
Without following the control, adjustment or operation procedure, may cause
damage by the exposure of laser radiation.
6.
Do not block any ventilation openings. To ensure reliable operation of the
projector and to protect from over heating, it is recommended to install the
projector in a location that does not block ventilation. As an example, do not
place the projector on a crowded coffee table, sofa, bed, etc. Do not put the
projector in an enclosure such as a book case or a cabinet that restricts air flow.
7.
Do not use the projector near water or moisture. To reduce the risk of fire and/or
electric shock, do not expose the projector to rain or moisture.
8.
Do not install near heat sources such as radiators, heaters, stoves or any other
apparatus such as amplifiers that emits heat.
9.
Clean using only our cleaning kit accessory.
10.
Only use attachments/accessories specified by the manufacturer.
11.
Do not use the unit if it has been physically damaged or abused. Physical
damage/abuse would be (but not limited to):
•
Unit has been dropped.
•
Power supply cord or plug has been damaged.
•
Liquid has been spilled on to the projector.
•
Projector has been exposed to rain or moisture.
•
Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers may
expose you to dangerous voltages or other hazards.
12.
Do not let objects or liquids enter the projector. They may touch dangerous
voltage points and short out parts that could result in fire or electric shock.
13.
See projector enclosure for safety related markings.
Summary of Contents for CRYSTAL4-SH
