21
– Expose the battery ( see 4.3.1 Exposing the battery
Page 18 ).
– Remove the battery connector (3).
– Strap the crane lifting gear to the eyes (8).
–Drawing back the emergency brake switch.
When replacing a battery always use the same battery type. Extra weights must not
be removed and must remain in the same position.
– Installation is in the reverse order of operations. When reinstalling the battery,
heed the required installation position and make sure the battery is connected
correctly.
（
2
）
remove the side panel
The truck must be parked on level
ground.
To
prevent
short
circuits,
batteries with exposed terminals or
connectors must be covered with a
rubber
mat.
Place
the
battery
connector or the battery cable in such a
way that they will not get caught on the
truck when the battery is removed.
–Remove the battery panel which on
the side, then pull out the battery.
Installation is in the reverse order of
operations.
After installing the battery again, check
all cables and plug connections for
visible signs of damage.
Before starting the truck, the battery panel must be firmly closed. Close the battery
panel carefully and slowly. Do not reach between the battery panel and the chassis.
