Frequently Asked Questions and Solutions:
1. How can I recalibrate the scale after moving it?
- Simply step on the scale to let it power on
- Let the reading drop to 0.0kg/0.0lb and calibration will be complete
Note:
The scale will be inaccurate if it is not recalibrated.
2. Display indicates "Err" when weighing.
- Overloaded the maximum range (182.5kg / 405.51b)
Tip:
When overloaded, do not stand on the scale for a long time. The service time
of the sensors will be shortened.
3. Display indicates "Err2" when measuring body fat.
- Body parameter settings should be:
Height: 100cm-220cm (3’3”-7’3”)
Age: 10-99 years
- Feet or scale are too wet
4. No body fat data measured when weighing.
- Body fat scale requires weighing with bare feet
- Body parameter settings should be:
Height: 100cm-220cm (3’3”-7’3”)
Age: 10-99 years
- Bluetooth setting not enabled
- Device is paired with another connected electronic scale
5. Bluetooth not connected.
- Application must be open when taking readings
- Device's Bluetooth function is disabled (enable Bluetooth function and restart
iWellness)
For Android devices, go to System Settings > Bluetooth > Cancel the paired
bluetooth devices and reopen the application.
MAINTENANCE
1. The four feet of the scale are rubber components. Do not keep the scale
loaded for long periods of time as it may damage the weight sensors and the
scale will not be accurate.
2. Do not put anything on the scale if not in use. This will consume power and
reduce the lifetime of batteries.
3. Keep the product clean and dry; Keep away from water; Avoid slipping from
scale which may damage the inside electric circuits when weighing.
4.
Do not drop!
Avoid the risk of damaging the scale or breaking the glass.
5. The scale is in low power when showing “Lo”. Please change batteries
immediately. Permanent damage of the battery will be caused if the scale is
kept in low power mode for a long time.
6. This product is a body analyzer scale, for body composition measurements
only, and not to be used for commercial purposes.
ACCURACY RANGE
50 kg: +/- 0.2 kg (110 lbs: +/- 0.44 Ibs)
100 kg: +/- 0.3 kg (220 lbs: +/- 0.66 lbs)
150 kg: +/- 0.4 kg (330 lbs: +/- 0.88 lbs)
DISPLAY INDICATORS
Err
: Scale Overload (over the max weight 182.5kg / 405.5lb)
Err2
: Body Analyzer Error
Lo
: Low Battery (4.2V ± 0.2V)
Summary of Contents for CF376BLE
Page 1: ...Please read instructions carefully before operating...
Page 14: ......
