INSTRUCTIONS FOR USE
Energy saving
The automatic energy saving system becomes active when the programmed
cooking time is longer than one hour. This system anticipates by a few minutes
switching off the heating elements, without this affecting the quality of the cooking,
thus saving energy. The automatic activation of this function is shown by the icon
of the cooking programme in operation flashing.
Safety thermostat
This interrupts the power supply to avoid excessive overheating due to incorrect
use of the appliance or any defect of the components. If this device has been
activated due to incorrect use, it is sufficient to wait for the oven to cool down to
be able to use it again. If, on the other hand, it is due to a defect of the
components, you must call the Technical Assistance Service.
Cooling motor
The oven has a cooling motor for the internal components and the control panel.
This device goes on automatically when the threshold of the internal temperature
exceeds a pre-set value and remains active, after the oven has been switched off,
until this temperature is reduced.
COOKING
The oven offers the possibility of choosing between the following cooking
functions:
STATIC
The Upper and Lower heating elements are active.
This function is suitable for particularly crisp roasts and meat dishes or
lasagne or similar dishes.
BOTTOM
The lower heating element is in function.
Suitable for cooking food that requires heat from below.
5 - ENGLISH