![background image](http://html1.mh-extra.com/html/silverline/slv-242/slv-242_user-manual_1273498037.webp)
37
Working about Electrical Safety
Any work done on electrical equipment and systems, performed by competent and
qualified persons.
Turn the product off and disconnect power in case of any damage. Turn off your home
insurance.
Make sure it is compatible with the fuse.
INSTALLATION
Installation should be carried out according to the instructions by a professionally qualified
person. The manufacturer will not accept responsibility for any damage to persons, animals or
things due to wrong installation.
ENVIRONMENTAL WARNING:
If the device after installation, packaging materials,
showingthe importance of safety and environmental conditions need to throw it away.
According tothe properties for re-use of waste packaging (foil, cardboard, Styrofoam,
etc.) Before throwing away the product by cutting the power cord is not used for children
are not exposed to danger and drape.
Installation Instructions
For installation the appliance must be connected in accordance with all local electrical regulations.
The oven has been designed to be fitted into a kitchen unit. It can be fitted either under
a worktop or in a taller cupboard unit at eye level. Cut out an opening in the kitchen unit
as shown in.
(See Figure 1 and Figure 2)
The walls of the furnace is mounted must be heat resistant. In particular the side walls were
made of fiberboard coated. The coating resistant must be to 100 °C. This not heat-resistant
synthetic laminates and adhesives, plastics or adhesive materials may be damaged. This
information will only be to create a guide and the real resistance against the increase in
temperature depends on the degree of kitchen units and surface polish performance.
Certain kitchen unit of surface of polishing types (example vinyl) is especially sensitive at
the lower temperatures with color damage, above mentioned temperatures.
Installation of the device in contravention of the warnings or the cabin materials placed
to device closer to the 5 mm responsibility of the owner.
The power cord avoid crush, fold and clamped or avoid contact with hot parts of product.
After installation, the plug must be easily accessible location.
There must be safe distance between kitchen walls and furniture.
A correct installation will have to ensure a proper protection against contact with electric
parts or merely functionally isolated parts.
All the units meant to ensure protection have to be fitted not to be taken away without
using a tool.
For the most efficient air circulation, the oven should be fitted according to the dimensions
shown in
(See Figure 1 and Figure 2)
If the built-in oven is mounted below the hob, distance of at least must be 50 mm.
The rear panel of the cabinet must be removed so that air circulates freely. The panel to
which oven is fitted should have a gap at least 75 mm at the rear.
(See Figure 3)
We recommend not installing the appliance near refrigerators or freezer, since the heat
could affect the performance of these appliances.
Summary of Contents for SLV 242
