![background image](http://html1.mh-extra.com/html/silverline/slv-242/slv-242_user-manual_1273498054.webp)
54
GENERAL CLEANING AND MAINTENANCE
Oven after each use with warm, soapy damp cloth, wipe the oven should not be in the food
and oil waste.Because these wastes can cause corrosion on the inner and outer surfaces.
Disconnect the plug before any cleaning or on-off button on the device is switched off by
bringing the theme of the furnace switch off the electricity.
Allow to cool before cleaning the device.
Stainless steel surfaces, the market can supply clean by using a special stainless steel
cleaner spray or liquid.
Cleaning product to use cleaning materials which can scratch the enamel or painted
surfaces please note does not contain particles.
When cleaning the control panel buttons, signs, and liquid cleaners containing abrasive
particles to be deleted and not use wire dish sponge.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass
since they can scratch the surface, which may result in shattering of the glass.
Enamel, painted and stainless steel surfaces, abrasive and acidic spots (lemon juice,
vinegar, etc.). Do not leave.
Do not use steam-cleaning products for general cleaning products.
OVEN DOOR GLASS
Clean the oven door glass with warm water and a soft cloth only, then wipe dry.
Never use harsh abrasives, steel, wool cleaners with bleach, as they could damage the
glass.
INNER DOOR GLASS
Clean the inner door glass with warm water and a soft cloth only, then wipe dry.
Never use harsh abrasives, steel, wool cleaners with bleach, as they could damage the
glass.
Full glass inner door
Full glass inner door with a flat surface with a damp sponge and a soft clean dry cloth.
(See
Figure 9)
As shown in the figure, while the cover is open;
1. Please slide outward the glass to inner tank.
2. After eliminating the glass bottom tabs, to ensure the delivery of the glass with removed
upward.
3. Take out the glass.
After cleaning, the order done in reverse is firstly the glass cover placed to channel from the
top. After, provide the establishment of glass spring with pushed it to the channel the glass.
After the installed of the glass bottom tabs will go down, achieve the progress by leaving its
own channel.
Summary of Contents for SLV 242
