117
GB
1. Press the “FOREHEAD” button
3
and the “EAR”
button
2
repeatedly at the same time until the LC
display
4
again shows the room temperature, date
and time, as well as the symbol (Illustration D).
2. You are now in standard mode again.
Changing the battery
The appliance is fi tted with a lithium battery (CR2032,
3 V
) that allows a lot of measurements to be taken. If
the battery is empty, you will be made aware of that by
means of an appropriate error message (see “Functions /
error analysis - problem-solving”).
Push the battery compartment lid
10
downwards.
Lever the battery
11
out with a small screwdriver.
Avoid short-circuiting the battery at all cost. A short-
circuit can occur if the screwdriver comes into contact
with the battery and the live parts in the battery
compartment at the same time.
Insert the new battery into the battery compartment.
Note
: Ensure correct polarity. The plus sign on the
battery must point upwards.
Push the new battery under the metal nose and press
it down until it clicks into place.
Push the battery compartment lid
10
onto the battery
compartment until it clicks into place (Fig. A).
IB_106635_SSOT6B2_DE_FR_IT_GB_LB1.indd 117
19.09.14 14:00
