Silvercrest SHBSP 800 A1, Operating Instructions Manual, Page: 49 / 201

47
GB
10. Cleaning and care
DANGER! Risk of electric shock!
~
Unplug the USB plug-in power unit | 10 from the wall socket before
cleaning the hair and beard trimmer | 4 .
WARNING! Risk of injury!
~
Always switch the hair and beard trimmer | 4 off before cleaning.
WARNING! Risk of material damage!
~
Do not use any astringent or abrasive cleaning agents.
NOTE: clean and oil the device after every use.
Hair and beard trimmer
• Wipe the casing of the hair and beard trimmer | 4 with a damp
cloth.
Comb attachments
• Remove the comb attachments | 1 , | 2 and | 14 .
• Rinse the comb attachments | 1 , | 2 and | 14 with water and let them
dry before reusing them.
Shaving head
1. Figure C: press the release button | 12 to release the shaving
head | 13 .
2. Remove the shaving head | 13 upwards.
3. Remove the hair remnants from the shaving head | 13 by using the
supplied cleaning brush | 23 .
4. Clean the blades | 3 of the shaving head | 13 with water. Do not use
any other liquids. Let the shaving head | 13 dry.
5. Apply a few drops of the supplied oil | 22 to the blades | 3 of the
shaving head | 13 and spread it out evenly. Using a soft cloth, wipe
off the surplus oil, if necessary. Only use acid-free oil, such as e.g.
sewing machine oil.
__291948_Haarschneider_Autokamm_B8.book Seite 47 Mittwoch, 20. Dezember 2017 1:25 13