SKGE 2000 C3
GB
│
MT
│
51
■
Cleaning and care
Safety instructions
WARNING!
DANGER TO LIFE DUE TO ELECTRIC SHOCK!
Risk of injury when cleaning the appliance!
To avoid risks, observe the following safety instructions:
►
Before cleaning, pull out the plug and wait until the
appliance has completely cooled down. Risk of injury!
►
Never clean the appliance under running water and never
immerse it in water. The appliance could be irreparably
damaged!
CAUTION!
Damage to the appliance!
►
To avoid irreparable damage to the appliance, ensure that no moisture can
penetrate the appliance during cleaning.
►
When cleaning the surfaces use neither abrasive or chemical cleaners, nor
sharp or scratchy objects.
■
Draw the cleaning scraper
3
over the hotplates
after the hotplates
have cooled down so that fat and residues are aggregated, and then slide
them into the fat collector tray
.
■
Wipe the hotplates
with a damp cloth. Do not use any abrasive cleaning
agents, rough sponges or sharp objects for cleaning as these could damage
the non-stick coating.
For more stubborn soiling or hardened residue, remove the hotplates
:
–
Open the appliance.
–
Press the RELEASE button
and at the same time, remove the lower
hotplate
.
–
Hold the upper hotplate
in place to prevent it from falling and press the
RELEASE button
-
. The upper hotplate
is released from the
appliance.
Clean the hotplates
which have been removed in warm water with a little
detergent in it. For severe incrustations, leave the hotplates
to soak for a while
in the water. After washing, rinse the hotplates
with clean water to remove all
detergent residues. Dry everything properly. The hotplates
must be dry before
you put them back in the appliance!
Summary of Contents for 331321 1907
Page 3: ...A B C ...
