63
GB/MT
Troubleshooting
= Cause
= Solution
The product is unstable.
Adjust the transport safety lock
2
to ensure
that the turntable is sufficiently loose . Turn the
transport safety lock
2
in clockwise direction
until light resistance can be felt .-
The product does not work.
Ensure that the product is connected to the
power supply and that the POWER button
16
has been pressed .
No sound during playback – Check the AUX
input jack
19
: No plug shall be connected to
the AUX input .
The record is skipping.
Ensure that the record is clean and that
the pickup needle
8
does not need to be
replaced .
The pickup needle needs to be
replaced.
Proceed as described in the section “Removing
an old pickup needle“ or “Inserting a new
pickup needle“ .
Earthing requirements?
The connection of earth terminal (GND –
Potential equalisation port
18
) of this unit is not
for safety grounding purposes .
If this terminal is connected when there is a
lot of noise, the noise can be reduced . Note
that depending on the turntable, connecting
the ground line may have the reverse effect of
increasing noise . In this case, it is not necessary
to connect the ground line .
Storage
¾
¾
Unplug the power supply
24
if the product is
going to be out of use for a longer period of
time .
¾
¾
Store the product in a dry environment .
¾
¾
Secure the pickup needle
8
with the head-
shell
9
.
¾
¾
Close the cover
1
after use .
