Silvercrest 281064, Operating Instructions Manual

Page: 14 / 59

■ 10
│
GB │ CY SKV 1200 A1
Cleaning and care
DANGER – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
Never immerse the appliance in water or
any other liquid!
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces.
NOTES
► We recommend cleaning the appliance
directly after use. This makes food residues
easier to remove.
► Processing foods that contain strong pig-
ments, such as carrots, may lead to staining
of the plastic parts. These stains can be
removed using a little cooking oil.
Cleaning the appliance
■ Wipe the appliance with a damp cloth. For
stubborn soiling use a mild detergent on the
cloth. Wipe off any detergent residue using a
cloth moistened with clean water. Then dry the
appliance carefully.
Cleaning the accessories
■ Clean the mixing bowl , the lid , the cover
of the filling opening , the blender lid
.
with
measuring cup
!
, the drive protection cover
1
,
the blender tool
,
and the attachments
-3
in warm water with a little detergent. Any residues
can be removed with a washing-up brush. Rinse
all parts with warm clean water and make sure
that all parts are dry before re-using them.
NOTE
► The attachments
-3
, the lid and the
mixing bowl are also suitable for cleaning
in the dishwasher.
► If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed.
► If possible, place all plastic parts in the top
basket of the dishwasher.
Cleaning the blender
WARNING! RISK OF INJURY!
► Do not touch the blades 6 with your bare
hands.
■ Clean the blender
0
and the blender lid
.
with measuring cup ! in warm water and add
a mild detergent (washing-up liquid). Then rinse
all parts with clean water so that no detergent
residues remain.
■ If this cleaning is not sufficient, you can unscrew
the blade holder
with the blade
6
from the
blender jug using the blender tool , :