Silvercrest 281064, Operating Instructions Manual

Page: 15 / 59

GB │ CY
│
11 ■ SKV 1200 A1
Blade holder
Sealing ring
Blender jug
–
Turn the blender 0 over.
–
Insert the blender tool
,
into the underside
of the blender
0
/ the blade holder so
that the two catches on the underside of the
blender
0
/ the blade holder grip into
the recesses in the blender tool
,
.
–
Turn the blender tool
,
towards (anti-
clockwise) until the blade holder with the
blade
6
can be lifted out of the blender
0
.
–
Pull the sealing ring from the blade
holder with the blade
6
.
■ Now you can clean all the parts (blender jug ,
blade holder the blade
6
and sealing ring )
in warm water with a little washing up liquid
using a washing up brush. Afterwards, rinse all
the parts with clean water so that no detergent
residues remain.
NOTE
► The blender jug , the blade holder with
the blade
6
and the sealing ring are all
dishwasher-safe.
If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed. We recommend
using the top rack of the dishwasher and a
washing programme with max. 45°C.
► The blender lid
.
with the measuring cup
!
is not dishwasher-safe.
■ After cleaning, reassemble the blender:
–
Push the sealing ring back into the recess
on the blade holder with the blade 6 .
–
Place the blade holder with the blade
6
back into the blender jug so that the
blade
6
protrudes into the blender jug .
–
Insert the blender tool
,
into the underside
of the blender
0
/ the blade holder so
that the two catches on the underside of the
blender
0
/ the blade holder grip into
the recesses in the blender tool
,
.
–
Turn the blender tool , towards (clock-
wise), so that the blade holder with the
blade
6
sits hand-tight on the blender jug .
In most cases, you can achieve sufficiently hygienic
cleaning of the blender
0
immediately after use in
the following way:
1) Put some water containing a little detergent
into the fully assembled blender
0
.
2) Place the blender lid
.
with measuring cup
!
in position so that the lips of the blender lid
.
also seal the spout.
3) Switch on the blender 0 for a few seconds.
4) Pour out the washing water. Any residues can
be removed with a washing-up brush.
5) Then rinse out the blender 0 with plenty of
clean water so that all detergent residues are
removed.
Storage
■ Store the cleaned appliance in a clean, dust-free
and dry location.