background image

Service Manual

Philips Domestic Appliances and Personal Care

Published by Philips Domestic Appliances and Personal Care 

Printed in the Netherlands 

© Copyright reserved 

Subject to modification

Service Manual 4322 277 00103 is herewith cancelled.

Food processor

HR 2831/B
HR 2833/B

Product meets the requirements regarding 
interference suppression on radio and TV.

After the product has been repaired, it should 
function properly and has to meet the safety 
requirements as laid down offi cially estab-
lished at this moment.

Cucina

PRODUCT INFORMATION

Motor 

 

:  Universal, radio/TV interference

  

 

  suppressed power

Consumption  

: 350 

Watt

Voltage 

 

   220-240V, 120V, 50-60Hz

Cordset 

 

:  1.2m, double insulated

Speed setting  HR 2831  :  1 

speed + pulse

 

HR 2833  :  vario speed + pulse (500-1800 rpm)

Bowl capacity   

:  2.2 L dry ingredients

 

 

   0.8 L liquids

Kneading capacity 

:  250 g of fl our with metal knife

 

 

:  350 g of fl our with metal kneader

Dimensions product 

:  270 x 200 x 250 mm (l x w x h)

SERVICE INFORMATION

Use grease 4822 390 20004 to lubricate the parts of the gearbox.

4322 277 00351
00/08

Note:

Support the rotorshaft to prevent forces on the motor bearings, 
during the assembly of the pinion on the rotorshaft.

3,50 ± 0,15

4

4A

Summary of Contents for HR 2831/B

Page 1: ...estab lished at this moment Cucina PRODUCT INFORMATION Motor Universal radio TV interference suppressed power Consumption 350 Watt Voltage 220 240V 120V 50 60Hz Cordset 1 2m double insulated Speed setting HR 2831 1 speed pulse HR 2833 vario speed pulse 500 1800 rpm Bowl capacity 2 2 L dry ingredients 0 8 L liquids Kneading capacity 250 g of flour with metal knife 350 g of flour with metal kneader ...

Page 2: ...A 4203 065 61800 Gearbox pinion x x 5 4822 466 62531 Drive unit buffer x x 6 4822 277 11718 Safety switch x x HR 2831 HR 2833 7 4822 441 12041 Lower housing x x 8 4822 528 11164 Drive coupling x x 9 4822 690 10114 Food pusher x x 10 4822 442 00892 Bowl cover x x 11 4822 321 10364 Cord x x 12 4822 214 12419 Speed control unit x 13 4203 065 62260 Bowl assy x x 14 4822 690 40212 Spatula x x 4822 290 ...

Page 3: ...r x x 20 4203 065 61530 Slicing insert fine x x HR 2831 HR 2833 21 4203 065 61540 Slicing insert medium x x 22 4203 065 61570 Granulating insert x x 23 4203 065 61550 Shredding insert fine x x 24 4203 065 61560 Shredding insert medium x x 25 4203 065 62310 Shredding insert coarse x x 26 4203 065 61520 Insert carier x x 27 4822 442 01104 Bowl cover opt x x HR 2833 only DAP1008 23 24 25 26 22 21 20 27...

Page 4: ... poti gear mount the print plate in the housing turn the speed knob to pos 2 put a screw driver to trim the speed to 1250 rpm poti gear 1 put the speed knob to the most left position SERVICE INSTRUCTION FOR REMOVING THE PULSE KNOB 2 take a small screw driver and press it between speed knob and pulse knob 3 turn the screw driver to pull the knob a little bit out of the power unit a set the screw dr...

Reviews: