10 GB
8. Cleaning
Clean the device prior to its first use!
DANGER! Risk of electric
shock!
~
Pull the mains plug
14
out the wall
socket before cleaning the food proces-
sor.
~
The motor block
15
, the power cable
and the mains plug
14
must not be im-
mersed in water or any other liquids.
DANGER! Risk of injury from
cutting!
~
When washing manually, the water
should be sufficiently clear that you can
see the blades
4
,
5
and
8
easily.
WARNING! Risk of material dam-
age!
~
Do not use any astringent or abrasive
cleaning agents.
Dismantling the device
1. Pull out the mains plug
14
.
2. Turn the bowl
11
anti-clockwise, until
the symbol
16
points to the bottom
marking on the bowl
12
.
3. Hold the bowl
11
tightly. Turn the lid
3
anti-clockwise, until the symbol
2
points to the top marking on the
bowl
10
. Remove the lid.
4. Carefully remove the dough blade
7
,
the blade insert
8
or the insert holder
6
with attached slicing insert
4
/ grating
disk
5
. Remove the drive axle
9
.
5.
Figure F:
turn the insert holder
6
around and hold it over a washable,
scratch-proof surface. Press the extending
edges of the slicing insert
4
/ grating
disk
5
inwards and press it out.
How to clean properly
1. If necessary, wipe down the motor
block
15
and the power cable
14
with
a damp cloth. Ensure that the motor
block
15
is completely dry before the
next time it is used.
2. Wash all other parts by hand in warm
water and a little detergent.
3. Allow all parts to dry completely before
you put them away or use the device
again.
Some cleaning tips
• Clean the device as soon as possible af-
ter use in order to prevent food rem-
nants from drying on.
• After processing very salty or acidic
foodstuffs, the dough blade
7
/ blade
insert
8
, the insert holder
6
and the slic-
ing insert
4
/ grating disk
5
should be
washed thoroughly and right away.
9. Storage
DANGER for children!
~
Keep the device out of the reach of chil-
dren.
DANGER!
~
In order to avoid accidents, the mains
plug
14
must never be connected to a
wall socket while in storage.
• Assemble the food processor for stor-
age. This allows the blade insert
8
to be
stored safely.
• Select a location where neither high
temperatures nor moisture can affect the
device.
•
Figure G:
the power cable
14
can be
wound up on the cable spool in the
housing cover of the motor block
15
.
__CPE273409_Kuechenmaschine_B4.book Seite 10 Mittwoch, 18. November 2015 9:00 09
