Silver Stream-In / Stream-Out - User Manual SR 1.0.4 – 10/2012
Page 56
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | www.aptcodecs.com | [email protected]
4.4.5.2
Connection Wizard – Codec Settings
The next page guides to the Audio mode settings. The Silver units provide similar pages for
the Encoder and the Decoder depending on the type of unit, hence the Encoder configuration
is provided on the Stream-In unit and the Decoder configuration on the Stream-Out.
Figure 4-14: Shows the Decoder configuration page (Stream-Out)
Algorithm (1)
Clicking on the “Algorithm” field opens the drop down list offering the available audio co-
dec formats. Currently Enhanced apt-X and Linear PCM are available. Select the desired
format then click on the “Bit Rate” field.
Bit Rate (2)
Corresponding to the chosen audio format this drop down list presents the available bit
rates. After selecting the bit rate, the “Mode” field entry may be filled automatically in
dependence of the audio mode and chosen bit rate.
Audio Mode (3)
Audio Mode means either Mono or Stereo. If this field is not computed automatically,
chose the desired mode. Finally the “Bandwidth” field displays the resulting audio band-
width and the sample frequency.
The Encoder and Decoder configuration is almost identical. There is one important check
box on the Decoder page: The Re-Sequencer check box – keep this enabled! This en-
sures that packets arriving out of order can be re-ordered inside the de-jitter buffer.
After completing the Encoder/Decoder settings also, click on the “Next” button to enter the
IP Stream configuration page.
