Silver Stream-In / Stream-Out - User Manual SR 1.0.4 – 10/2012
Page 18
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | www.aptcodecs.com | [email protected]
2.6
Getting Started
Before you can launch the Management System please ensure the following pre-conditions of
your network settings:
To get started with the NMS application, ensure that the cabling is properly connected
from the Codec to the PC, and that your service PC’s Ethernet cards has an IP address
within the range of 192.168.100.0 to 192.168.100.255. The Silver Stream-In and
Stream-Out are set to an IP address within this range as a factory default – usually
192.168.100.110.
The NMS application will remain inactive until a link is established between the service
PC and an active Codec device.
Release Notes
As of this publication date, system release 1.0.4 is shipped with the Codec device. We rec-
ommend that you check the APT website for updates.
Launch the Management System application. You will find the program located in the Win-
dows Start Menu under “Program
WorldNet NMS”. Start the program and you will be
prompted to log in:
NMS Log-In:
There are three levels of
access to the WorldNet
Codec Management Sys-
tem:
All accounts, the “Administrator”, “Normal” and the “Read Only”, require Username and
Password login. When shipped only an Administrator account is configured with the default
login. We recommended that you change the Administrator login as soon as possible.
Default Username:
administrator
Default Password:
password
