Silver Stream-In / Stream-Out - User Manual SR 1.0.4 – 10/2012
Page 55
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | www.aptcodecs.com | [email protected]
Main Menu – Connection/Connection Page (continued)
Quick Connection (1)
A “Quick Connection” is basically a pre-configured and previously stored profile. This pro-
file was created and merged from an audio mode configuration and an IP stream setup.
Before a Quick Connection can be used, a profile must have been created first.
Clicking on the little arrow opens a list with available profiles. Once the required profile
was selected it can be applied seamlessly to the Codec by clicking the “Apply” button on
the bottom right corner.
Configuration Wizard (2)
The “Configuration Wizard” guides to a step-by-step procedure creating a profile. It
prompts for audio settings and for IP settings. Finally it creates a profile by merging both
components. Once a profile was created it appears on the Quick Connection drop down
list.
Advanced Configuration (3)
The “Advanced” configuration procedure provides all configuration and management op-
tions on a single page. Other than the Configuration Wizard the “Advanced” configuration
allows modifications on the currently applied profile and configuration. It also provides
options and tools to edit already created profiles.
4.4.5.1
Connection Wizard - Creating a Profile
Connection Wizard – Profile Name
Selecting the radio box “Connection Wizard” on the connection page starts the Wizard. Firstly
a profile name must be entered in the Name field. Once a name is entered the “Next” button
becomes active. Clicking on this button opens the next page prompting the audio Codec set-
tings.
Figure 4-13: Shows the Connection Wizard's first page
