Silver Stream-In / Stream-Out - User Manual SR 1.0.4 – 10/2012
Page 24
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | www.aptcodecs.com | [email protected]
2.7.4
Reset the Codec Hardware IP Address
In the case that you cannot detect the required Codec device on your network, neither by
entering the IP address manually or by running the Net Wizard, you should reset the unit in
order to force the hardware default IP address. This is done by pressing the reset button on
the hardware front panel. Refer to section 3.1.2.3 of this manual about how to initiate the
reset. After you have reset the Codec and the Net Wizard has successfully connected it to the
NMS, you can then set the IP address to the required value of your network.
The Silver Stream-In/Stream-Out hardware default IP address:
192.168.100.110
2.7.5
Current Alarms
Clicking on the “Current Alarms” button opens a separate window showing the currently
flagged alarms of all connected codec frames. This alarm window presents the alarms status
in real time.
Figure 2-11: Shows the Current Alarms Window
The Current Alarms Window is a non-modal Window (independent from the main screen) and
can be moved independently on the PC screen (or to a second monitor).
