SF-106 Silvair Lighting Evaluation Kit User manual
3.4 Connect the power
To power up the Silvair Lighting Evaluation Board, connect the USB power supply cable
provided with the kit to the POWER SUPPLY 12VDC socket and turn on the OFF-ON switch. If
the POWER LED is on, it indicates a properly supplied board and you can proceed to
commissioning the device with the Silvair Commissioning mobile app.
3.5 Factory reset
Performing a factory reset restores the device to its default (factory) settings and removes it
from a Bluetooth mesh network. A factory reset is performed by pressing and holding the
Factory Reset button for 5 seconds after which the LED Board or connected driver/luminaire
will blink rapidly to indicate a successful reset. Check the factory reset button position
[email protected] www.silvair.com
page
14
Copyright © 2020 by SILVAIR, Inc. and SILVAIR group companies (“SILVAIR”). All Rights Reserved.
