SF-106 Silvair Lighting Evaluation Kit User manual
1. Insert the 0-10V Module into the DALI/0-10V socket.
2. Connect the driver and the LED light source as shown below:
WARNING:
This circuit in operation involves high voltage that can give lethal
shock.
Handle with extreme caution!
You can now use the Silvair Platform to commission the LED driver via the Silvair Lighting
Evaluation Board. Please refer to the
Silvair Commissioning User Manual
for further instructions.
[email protected] www.silvair.com
page
13
Copyright © 2020 by SILVAIR, Inc. and SILVAIR group companies (“SILVAIR”). All Rights Reserved.
