SF-106 Silvair Lighting Evaluation Kit User manual
3.2 Standalone Mode
In standalone mode, the LED Board is controlled via the PWM signal generated by the Silvair
Light Module. No external driver or light source is needed. To configure the Kit for standalone
mode, insert the LED Board included in the Evaluation Kit firmly into the socket.
3.3 External Device Mode
The Silvair Lighting Evaluation Kit can also be set up to operate an external single-channel
constant current 0-10V LED driver via the 0-10V Module:
[email protected] www.silvair.com
page
12
Copyright © 2020 by SILVAIR, Inc. and SILVAIR group companies (“SILVAIR”). All Rights Reserved.
