manualshive.com logo in svg

Silicon Laboratories Si8410, Manual, Page: 34 / 38

Share
Download
Silicon Laboratories Si8410 Manual Download Page 34

S i 8 4 1 0 / 2 0 / 2 1   ( 5   k V )  
S i 8 4 2 2 / 2 3   ( 2 . 5   &   5   k V )

34

Rev. 1.1

11.  Top Marking: 16-Pin Wide Body SOIC

Figure 21. Isolator Top Marking

Table 18. Top Marking Explanation

Line 1 Marking:

Base Part Number 
Ordering Options

(See Ordering Guide for more 
information).

Si84 = Isolator product series
XY = Channel Configuration

X = # of data channels (2, 1)
Y = # of reverse channels (1, 0)

1,2

S = Speed Grade

A = 1 Mbps; B = 150 Mbps

V = Insulation rating

A = 1 kV;  B = 2.5 kV;  C = 3.75 kV;  D = 5 kV

Line 2 Marking:

YY = Year
WW = Workweek

Assigned by assembly subcontractor. Corresponds to the 
year and workweek of the mold date.

TTTTTT = Mfg Code

Manufacturing code from assembly house.

Line 3 Marking:

Circle = 1.5 mm Diameter
(Center-Justified)

“e3” Pb-Free Symbol.

Country of Origin ISO Code 
Abbreviation

TW = Taiwan.

Notes:

1.

The Si8422 has one reverse channel.

2. 

The Si8423 has zero reverse channels.

Si84XYSV

YYWWTTTTTT  

TW

 

e3

Summary of Contents for Si8410







































Reviews:

No comments