Silicon Laboratories Si446 Series, Manual

Page: 70 / 112

A N 6 2 5
70 Rev. 0.1
3.5.49. PKT_FIELD_1_CRC_CONFIG
 Summary: Field 1 CRC configuration bits.
 Purpose:

Field 1 CRC configuration bits.
 Property: 0x1210
 Default: 0x00
 Fields:

CRC32_START - default:0

0x1 = Load CRC engine with seed value at the start of this field using CRC32_SEED.

SEND_CRC32 - default:0

0x1 = Transmit CRC at the end of this field

CHECK_CRC32 - default:0

0x1 = Check CRC at the end of this field. If PH_FIELD_SPLIT is set, this bit is ignored.

CRC32_ENABLE - default:0
0x1 = Enable CRC over this field.
 Register View
3.5.50. PKT_FIELD_2_LENGTH_12_8
 Summary: Byte 1 of field length
 Purpose:

This property specifices the length of this field in bytes.

A value of zero in this property means that the field is not used.

If the field is programmed as a variable length field, this property sets the maximum length of the field.

Used along with byte 0 property.
 Property: 0x1211
 Default: 0x00
 Fields:

FIELD_2_LENGTH_12_8[4:0] - default:0x00
0x0 = Bit 8 to 12 of the field length.
 Register View
PKT_FIELD_1_CRC_CONFIG
7 6 5 4 3 2 1 0
CRC32_START 0 SEND_CRC32 0 CHECK_CRC32 0 CRC32_ENABLE
0 0 0 0 0 0 0
PKT_FIELD_2_LENGTH_12_8
7 6 5 4 3 2 1 0
0x0 FIELD_2_LENGTH_12_8[4:0]
0x0 0x00