Si3454-KIT
Confidential Rev. 0.1
3
3. Installation
This KIT contains a PC-based Monitor GUI. Before you can use the Monitor, you must first install the device driver
associated with the PoE USB Adapter card (called “PoEUSB” in this document), then install the Monitor GUI.
3.1. Installing the PoEUSB Device
Note:
If you have previously installed the PoEUSB device, uninstall the previous driver version before installing the new ver-
sion. To uninstall the previous version, select “Programs and Features” or “Add or Remove Programs” from the Control
Panel, and then uninstall “Windows Driver Package - Silicon Labs, (WinUSB) MultiportSerial” and similar file names.
Figure 1. Uninstall Previous Revision Windows Driver Package
To install the PoEUSB device driver, run PoEUSBSetup.exe from the documentation that comes with this KIT.
Figure 2. PoE USB Device Installer Screen
After the PoEUSB device driver is installed, then complete the installation by connecting the PoEUSB adapter card
to the PC with a USB cable.
Summary of Contents for Si3454-KIT
