S i 3 4 5 4 - K I T
2
Confidential Rev. 0.1
2. Kit Contents
Table 1. Evaluation Kit Contents
Qty
Item
Contents
1
Si3454-EVB
Si3454 8-port evaluation board with connector for an external 50 V
power supply. The power supply must be capable of supplying the
required amount of power for all PoE loads being connected. The board
is populated with Si3454 parts.
1
Si3459CB-EVB
RJ-45 connector board configured as Power over Ethernet mid-span
injector with gigabit Ethernet pass-through.
1
RIBBON-20-4
20-wire cable connects the Si3454 evaluation board to the RJ-45 con-
nector board
1
USB-ADAPT-BRD
USB to I
2
C (or SMBus) translator board. This board is preprogrammed to
support I
2
C transactions. The label on this 2”x 2” board is “PoE USB
Adapter”.
1
S-USB2.06-01
USB cable to connect to a host PC
2
Si3402ISO-EVB
Powered Device evaluation board configured to provide a Class 3 signa-
ture.
1
Si3402ISO-C4-EVB
Powered Device evaluation board configured to provide a Class 4 signa-
ture.
3
LOADBOARD_REV1_0
Configurable load board.
6
HEXNUT 1/4-32_NIC
Nuts for attaching load boards to powered device evaluation boards
1
CON-2-MALE
Power connector to fit EVB J3
3
CAT5E-01
Ethernet cable to connect the Si3402 evaluation boards to the connector
board.
1
CD-ROM
Software drivers for the USB to I
2
C adapter and a GUI for the Si3454
registers on a CD-ROM. Applicable notes and data sheets are also
included.
Summary of Contents for Si3454-KIT
