S i 3 4 5 4 - K I T
12
Confidential Rev. 0.1
Figure 13. Interrupt Enable and Events Boxes
5.6.2. Events
The Events box shown in Figure 13 displays the status of the interrupt line and the port events. The GUI events
section indicates both global and port-specific events. Each events register consists of a pair of read-only (RO),
and clear-on-read (CoR) registers with the same event bits. Reading the RO register obtains the bit values but
does not affect the bits. Reading the CoR register obtains the values of the bits, and also clears the bits in both the
RO and CoR registers. The indicators in the GUI Events section show the values from the RO register if the RO
register is read by push of the “R” button or by polling.
Events enabled to cause an interrupt will propagate to the interrupt active indicator, but will only be reflected in the
remainder of the GUI when the RO registers are read. For the best real-time view of the Si3454 events bits, it is
recommended to enable polling.
5.7. Register List
The Register List shown in Figure 14 displays the contents of the Si3454 registers and allows the user to change
the register contents.
Summary of Contents for Si3454-KIT
