Silicon Graphics Rackable H2106-G7, System User'S Manual

Page: 58 / 112

34 007-5683-004
5: System Serverboard Information
Serverboard Details
The 2U H2106-G7 system chassis has one node board. The H2106-G7 serverboard is configured
with up to four processors. When properly configured with four processors, the following rules
apply:
• All processor sockets must have identical revisions, core voltage, and bus/core speed.
• The stepping between the processors on the board must be identical.
• See Figure 5-3 for CPU locations on the serverboard - note that the drawing is not to scale.
CPUs
• Quad AMD Opteron 6100/6200/6300 series (Socket G34 type) processors
Note: A minimum of four processors must be installed for full functions to be supported.
Memory
• Thirty-Two (32) single/dual/tri/quad channel DIMM slots supporting up to 512 GB of
DDR3-1600/1333/1066/800 registered ECC or 128GB of DDR3 Unbuffered ECC/non-ECC
SDRAM
Note: Refer to the memory installation information in this guide before installing new
memory. Check with your authorized sales/service representative for approved DIMM types.
Chipsets
• One AMD SR5690 plus one SR5670 and one SP5100 Southbridge chipset
Expansion Slots
• Two (2) PCI-Express x16 Gen. 2
• Two (2) PCI-Express x8 Gen. 2
• One (1) UIO BIOS
• 16 Mb AMIBIOS ® SPI Flash ROM
• APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0 (ACPI 2.0 is BIOS supported), SMBIOS 2.3, Real
Time Clock Wakeup, Plug and Play (PnP), BIOS resume hot keys