manualshive.com logo in svg

Silicon Graphics Rackable C2108-TY10, User Manual

Share
Download
Silicon Graphics Rackable C2108-TY10 User Manual Download Page 98

76

007-5688-003

7: BIOS

Select UDMA6 to allow the BIOS to use Ultra DMA mode 6. It has a data transfer rate of 133 
MBs. The options are Auto, SWDMAn, MWDMAn, and UDMAn. 

S.M.A.R.T. For Hard disk drives

 

Self-Monitoring Analysis and Reporting Technology (SMART) can help predict impending drive 
failures. Select Auto to allow the AMI BIOS to automatically detect hard disk drive support. 
Select Disabled to prevent the AMI BIOS from using the S.M.A.R.T. Select Enabled to allow the 
AMI BIOS to use the S.M.A.R.T. to support hard drive disk. The options are Disabled, Enabled, 
and 

Auto

.

32Bit Data

Select Enable to enable the function of 32-bit IDE data transfer. The options are 

Enabled

 and 

Disabled.

Hot Plug 

This feature is available when the option-AHCI Under "Confiigure SATA#1 as" is selected.

Select Enable to enable the hot plug function for the SATA devices. The options are 

Enabled 

and 

Disabled. 

IDE Detect Timeout (sec) 

Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI devices installed 
in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and 

35

.

PCI/PnP Configuration 

Clear NVRAM 

This feature clears the NVRAM during system boot. The options are 

No

 and Yes. 

Plug & Play OS 

Selecting Yes allows the OS to configure Plug & Play devices. (This is not required for system 
boot if your system has an OS that supports Plug & Play.) Select 

No

 to allow the AMI BIOS to 

configure all devices in the system. 

Summary of Contents for Rackable C2108-TY10



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands