manualshive.com logo in svg

Silicon Graphics Rackable C2108-TY10, User Manual

Share
Download
Silicon Graphics Rackable C2108-TY10 User Manual Download Page 94

72

007-5688-003

7: BIOS

USB 2.0 Controller Mode 

This setting allows you to select the USB 2.0 Controller mode. The options are Hi-Speed (480 
Mbps) and 

Full Speed (12 Mbps)

. 

BIOS EHCI Hand-Off 

Select Enabled to enable BIOS Enhanced Host Controller Interface support to provide a 
workaround solution for an operating system that does not have EHCI Hand-Off support. When 
enabled, the EHCI Interface will be changed from the BIOS-controlled to the OS-controlled. The 
options are Disabled and 

Enabled

.

Intel PCI-X Hub Configuration 

PCI Bus A0/B0 Frequency 

This option allows the user to set the maximum PCI speed to be used in the PCI slot specified. 
Select Auto to allow the BIOS to automatically detect the capability of the device installed on the 
bus. The options are 

Auto

, 33 MHz PCI, 66 MHz PCI, 66 MHz PCI-X MI, 100 MHz PCI-X MI, 

and 133 MHz PCI-X MI. 

I/O Port Decode 

This option allows the user to select the decode range for the I/O connections. The options are 

4K 

Decode

 and 1K Decode. 

RAS Sticky Error Handling 

This option allows the user to decide how to handle Sticky RAS errors. The options are

 Clear 

Errors

 and Leave Errors (unchanged). 

VGA 16-Bit Decode 

Select Enabled to enable the function of decoding VGA for the devices installed behind the PXH 
PCI Controller Hub. The options are 

Enabled

 and Disabled.

Summary of Contents for Rackable C2108-TY10



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands