manualshive.com logo in svg

Silicon Graphics Rackable C2108-TY10, User Manual

Share
Download
Silicon Graphics Rackable C2108-TY10 User Manual Download Page 86

64

007-5688-003

7: BIOS

Quiet Boot 

This option allows the bootup screen options to be modified between POST messages or the OEM 
logo. Select Disabled to display the POST messages. Select Enabled to display the OEM logo 
instead of the normal POST messages. The options are 

Enabled

 and Disabled.

AddOn ROM Display Mode 

This sets the display mode for Option ROM. The options are 

Force BIOS

 and Keep Current. 

Bootup Num-Lock 

This feature selects the Power-on state for Numlock key. The options are Off and 

On.

 

Wait For 'F1' If Error 

This forces the system to wait until the 'F1' key is pressed if an error occurs. The options are 
Disabled and 

Enabled

.

Hit 'Del' Message Display 

This feature displays "Press DEL to run Setup" during POST. The options are 

Enabled

 and 

Disabled. 

Interrupt 19 Capture 

Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to 
Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at boot and allow the 
drives that are attached to these host adaptors to function as bootable disks. If this item is set to 
Disabled, the ROM BIOS of the host adaptors will not capture Interrupt 19, and the drives attached 
to these adaptors will not function as bootable devices. The options are Enabled and 

Disabled

.

Power Configuration

This section describes power configuration options.

Summary of Contents for Rackable C2108-TY10



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands