manualshive.com logo in svg

Silicon Graphics Rackable C2108-TY10, User Manual

Share
Download
Silicon Graphics Rackable C2108-TY10 User Manual Download Page 95

Advanced Setup Configurations

007-5688-003

73

IDE and SATA Configuration 

When this submenu is selected, the AMI BIOS automatically detects the presence of the IDE 
devices and displays the following items: 

SATA#1 Configuration 

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while selecting Enhanced 
sets SATA#1 to native SATA mode. The options are Disabled, 

Compatible,

 and Enhanced. 

Configure SATA#1 as

 

This feature allows the user to select the drive type for SATA#1. The options are 

IDE

, RAID and 

AHCI. (When the option-RAID is selected, the item-ICH RAID Code Base will appear. When the 
option-AHCI is selected, the item-SATA AHCI will be available.)

ICH RAID Code Base (This feature is available when the option-RAID is selected)

 

Select Intel to enable Intel's SATA RAID firmware to configure Intel's SATA RAID settings. 
Select Adaptec to enable Adaptec's SATA RAID firmware to configure Adaptec's SATA RAID 
settings. The options are 

Intel 

and Adaptec.

SATA AHCI (This feature is available when the option-AHCI is selected

) 

Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take caution when 
using this function. This feature is for advanced programmers only.) The options are Enabled and 
Disabled. If the option-Enabled is selected, the following item will display. 

SATA#2 Configuration (This feature is available when the option-IDE is selected)

 

Selecting Enhanced will set SATA#2 to native SATA mode. The options are Disabled, and 

Enhanced

.

Primary IDE Settings

Primary IDE Master/Slave, Secondary IDE Master/Slave, Third IDE Master, and Fourth 
IDE Master

These settings allow the user to set the parameters of Primary IDE Master/Slave, Secondary IDE 
Master/Slave, Third and Fourth IDE Master slots. Hit 

<Enter>

 to activate the following 

Summary of Contents for Rackable C2108-TY10



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands