Silicon Graphics Presenter, Owner'S Manual

Page: 21 / 60

Setting Up the Presenter on the Dukane Customized Projector
9
Follow these steps to set up the Presenter with the Silicon Graphics
customized Dukane Overhead Projector. You can use the Presenter with
either the Dukane 28A681 or 28A682 projector. However the audio
capability on the Dukane 28A682 is not supported on the Presenter.
1. Remove the overhead projector from its carrying case.
2. Raise the arm to its upright position, using the illustration on the
overhead projector as a guide.
3. Lock the arm in place with the locking knob. See Figure 1-4.
4. Rotate the lens mechanism and raise the mirror, as shown in Figure 1-4.
Figure 1-4 Setting Up the Dukane Overhead Projector.
Arm
Mirror
Three−element lens
Wide−angle lens
Power switch
Power connector
Locking knob