Silicon Graphics Presenter, Owner'S Manual

Page: 16 / 60

4
Chapter 1: Setting Up and Using the Presenter Monitor
Follow these steps to connect the cables.
1. Connect the interface cable to the Presenter. It’s important that you
connect the interface cable
before the power cable.
The connectors on the cable and on the Presenter have an elongated
“D” shape. Make sure the “D” shapes match each other.
■
Connect either end of the interface cable to the connector on base of
the Presenter, as shown in Figure 1-2.
■
Connect the other end of the interface cable to the Presenter adapter
I/O port on your workstation. If necessary, refer to the installation
manual that comes with the Presenter board.
Figure 1-2
Connecting the Interface Cable to the Presenter
To workstation