Silicon Graphics Presenter, Owner'S Manual

Page: 17 / 60

Setting Up the Presenter Monitor
5
2. Connect the power cable to the Presenter and then to an electrical
outlet, as shown in Figure 1-3. (Figure 1-3 shows the power cable for the
U.S.A. The power cable for your country may look different.)
■
Connect the socket end to the power connector on the base of the
Presenter.
■
Connect the other end to a three-pronged grounded electrical wall
outlet or power strip.
Note: The power supply for the Presenter is auto-ranging. With the
appropriate power cable or adapter for your country, you can plug the
Presenter into almost any power source (50-60 Hz, 110/220 VAC).
Figure 1-3 Connecting the Power Cable
You are now ready to use the Presenter monitor.
To workstation