manualshive.com logo in svg

Silicon Graphics InfiniteStorage C1104-GP6, System User'S Manual

The Silicon Graphics InfiniteStorage C1104-GP6 System User's Manual is a comprehensive guide that provides detailed instructions for optimal use of this high-performance storage solution. Easily downloadable and completely free, it can be obtained from our website, ensuring users have all the essential information for seamless operation.

Share
Download
background image

18

007-6465-001

2: Server Installation

3. Hang the hooks of the front of the outer rail onto the slots on the front of the rack. Use 

screws to secure the outer rails to the rack. 

4. Pull out and adjust both the short and long brackets to the proper distance so that the rail can 

fit snugly into the rack, reference 

Figure 2-6 on page 20

. 

5. Hang the hooks of rear portion of the outer rail into the slots on the rear of the rack. Secure 

the long bracket to the rear side of the outer rail with the screws provided. 

6. Repeat the previous steps to properly install the left outer rail.

Figure 2-5

Outer Rack Rail Assembly/Placement Example

Summary of Contents for InfiniteStorage C1104-GP6













































































Reviews:

No comments

Related manuals for InfiniteStorage C1104-GP6

IBM 84885BU Maintenance And Troubleshooting Manual preview
84885BU
Brand: IBM Pages: 200
Galleon NTS-6001 Configuration Manual preview
NTS-6001
Brand: Galleon Pages: 47
IBM RS/6000 44P Series 270 Service Manual preview
RS/6000 44P Series 270
Brand: IBM Pages: 346
CNET CNP-101UW Specifications preview
CNP-101UW
Brand: CNET Pages: 2
Moxa Technologies 2140 User Manual preview
2140
Brand: Moxa Technologies Pages: 100
Fujitsu Eternus DX80 S2 User Manual preview
Eternus DX80 S2
Brand: Fujitsu Pages: 186
Fujitsu ETERNUS DX60 User Manual preview
ETERNUS DX60
Brand: Fujitsu Pages: 242
Kramer KC-BRAINware-5 Quick Start Manual preview
KC-BRAINware-5
Brand: Kramer Pages: 2
pachanko MINI User Manual preview
MINI
Brand: pachanko Pages: 56
Planet Multi-Port Fast Ethernet Print Server FPS-3121 Quick Installation Manual preview
Multi-Port Fast Ethernet Print Server FPS-3121
Brand: Planet Pages: 12
NASdeluxe NDL-2500T Quick Installation Manual preview
NDL-2500T
Brand: NASdeluxe Pages: 6
3onedata NP316 User Manual preview
NP316
Brand: 3onedata Pages: 12
Paxar Monarch 9850 Operator'S Handbook Manual preview
Monarch 9850
Brand: Paxar Pages: 108
VERITAS Sun Enterprise 10000 Manual preview
Sun Enterprise 10000
Brand: VERITAS Pages: 10
Planet NAS-1101 User Manual preview
NAS-1101
Brand: Planet Pages: 43
Oracle StorageTek LTO User Manual preview
StorageTek LTO
Brand: Oracle Pages: 34
Aaeon GCS-1500i User Manual preview
GCS-1500i
Brand: Aaeon Pages: 73
Quatech DSE-100D-EMB Specifications preview
DSE-100D-EMB
Brand: Quatech Pages: 2

Brands by name

Popular brands

Load more brands