Silex technology SX-BR-4600WAN, User Manual

Page: 97 / 100

A. Appendix
91
A LAN port error has occurred (POWER LED: Blinks rapidly, WLAN LED: OFF, STATUS LED: ON).
The bridge feature may be aborted as the non-wireless device is unplugged and
changed to the other device on the LAN port.
Solution Restart the SX-BR-4600WAN.
In
Single Client Mode
, if the non-wireless device is unplugged and changed to
the other device, SX-BR-4600WAN will abort bridging of that device, taking such
occurrence as an error.
Also, when the MAC address filtering is used to restrict the devices to bridge, you
will need to change the setting registered to
Network Device Address
.
This error does not occur in
Multi-Client Mode
. The restart is not required then.
Several devices may have been connected to the SX-BR-4600WAN using a HUB, though
it is operating in
Single Client Mode .
Solution
In Single Client Mode , connect only one device to the LAN port of SX-BR-
4600WAN. To use several devices, use Multi-Client Mode .
I cannot access the non-wireless device connected to a LAN port of the SX-BR-4600WAN.
The SX-BR-4600WAN or non-wireless device may not be operating correctly.
Solution Please check the LED status on SX-BR-4600WAN. Please also check that the non-
wireless device is properly powered on.
The connection may be restricted by the MAC address filtering on SX-BR-4600WAN.
Solution
See the setting at Network Device Address to check that access of the
connected device is not restricted by the MAC address filtering.
The connection to the non-wireless device is lost.
The connection may be timed out.
Solution If the connected non-wireless device is idle and no communication occurs from
it for 5 mins, SX-BR-4600WAN automatically cuts a link with it. To recover the
communication, try to do anything that can cause communication packets
on the non-wireless device. For the connection not to be timed out again, it is
recommended to disable the sleep mode on the non-wireless device.
(Example) If the connected non-wireless device is a printer and the printer has
turned into a sleep mode, printing will become unavailable as SX-BR-4600WAN
will disconnect a link with the printer.
To get printing ready again, wake up the printer from a sleep mode using the
control panel on it to make a communication from the printer to SX-BR-4600WAN.