manualshive.com logo in svg

Silex technology SX-BR-4600WAN, User Manual

Share
Download
Silex technology SX-BR-4600WAN User Manual Download Page 21

2. About SX-BR-4600WAN

15

- SX-BR-4600WAN does not support Ad hoc mode at 5GHz band.
   Please use it in Infrastructure mode then.

DS/OF

2.4

4

2.4

: Wireless devices using 2.4GHz frequency band

DS/OF

: DS-SS or OFDM is used as modulation.

4

: The range of interference is equal to or lower than 40m.
: All bands can be used to avoid interference.

Wireless devices using 2.4GHz band

The same frequency band of SX-BR-4600WAN is used for a microwave, industry, science, 
medical equipment and licensed in room or low power (non-licensed) radio stations.

- Before you use SX-BR-4600WAN, check that it does not interfere with other devices. 
- If interference occurs, stop using SX-BR-4600WAN or change the wireless band. 

Please consider to create a wall between these devices to avoid interference. Contact 
us for possible solution. 

Notes on using 5GHz band

- Use of 5.2GHz band (W52) and 5.3GHz band (W53) outdoors is prohibited by the 

radio regulations. Use only W56 channels then.

* The meaning of the symbols in the bottom of the unit:

Summary of Contents for SX-BR-4600WAN





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands