manualshive.com logo in svg

Silex technology SX-BR-4600WAN, User Manual

Share
Download
Silex technology SX-BR-4600WAN User Manual Download Page 41

4. How to Configure SX-BR-4600WAN

35

2.

Connect the AC adaptor to the SX-BR-4600WAN and the AC plug to the outlet.

3.

Turn on the non-wireless device connected to the SX-BR-4600WAN.

During the MAC address resolution, the WLAN LED and STATUS LED will flash 
alternately. When it is finished, the SX-BR-4600WAN will be ready to use. 
You can use the non-wireless device over a wireless network.

WLAN

STATUS

WLAN

STATUS

The LEDs flash alternately during 

the MAC address resolution

- Depending on the non-wireless device you have connected, further network settings may need to be 

configured to that device. In such a case, please configure it according to the operating manual that came 
with your device.

- When you turn on the SX-BR-4600WAN and your non-wireless device, be sure to turn on the SX-BR-

4600WAN first. Do not press the push switch then.

Note

Summary of Contents for SX-BR-4600WAN





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands