Silex technology SX-BR-4600WAN, User Manual

Page: 72 / 100

66
SX-BR-4600WAN User's Guide
Concurrent Mode
In
Concurrent Mode
, the wireless connection is available both from Wi-Fi Direct
connection and Access Point. If Wi-Fi Direct is used in a network as shown below, you
can access the non-wireless device connected to SX-BR-4600WAN without using the
Access Point. As users are not allowed to fully access your network and it is impossible
for the users to connect to the Access Point via SX-BR-4600WAN, you can establish a
secured network.
SX-BR-4600WAN
Access Point
Ethernet HUB
To backbone network
Connected
Connection is not allowed
Connected
Tablet device with
Wi-Fi Direct support
WLAN
STATUS
Connection using an Access Point Connection using Wi-Fi Direct
Printer
(Non-wireless device)
The Wi-Fi Direct cannot be used in Concurrent Mode in the following cases:
- A wireless connection is not established on the Access Point.
- 802.11b is used by the Access Point.
- W53 or W56 channels are used by the Access Point.
- Ad hoc is used as a wireless mode on the SX-BR-4600WAN.
TIP