Silex technology SX-BR-4600WAN User Manual Download Page 90

Page: 90 / 100

SX-BR-4600WAN User's Guide

Wireless LAN Configuration - WPS Configuration
PIN Code

Details

The PIN code of SX-BR-4600WAN is displayed.

Range

The value is automatically generated by clicking the button.

Default Value

Automatically generated

WPS Execution

Details

Execute the wireless configuration by WPS PIN.

Range

(WPS Execution button)

Default Value

Wireless LAN Configuration - IEEE802.1X Network Device Configuration
Device Filter

Details

Enable/Disable filtering for the devices registered to the network device
address.

Range

OFF / ON

Default Value

Note

If the device filter is disabled, communication will be bridged even for devices
not registered to the network device address. The device authentication (one
security feature of IEEEX authentication) will not be assured then.

Network Device Address

Details

Register the MAC address of devices to be connected to LAN port of the SX-BR-
4600WAN when the IEEE802.1X authentication is used.

Range

MAC address (in

Multi-Client Mode

, up to 16 addresses can be registered)

Default Value

(None)

Note

One Ethernet Address can be registered for

Single Client Mode

while 16

Ethernet Addresses can be registered for

Multi-Client Mode

Summary of Contents for SX-BR-4600WAN





































































































Search results

Summary of Contents for SX-BR-4600WAN

Reviews:

Brands by name

Popular brands

Silex technology SX-BR-4600WAN, User Manual

Search results

Summary of Contents for SX-BR-4600WAN

Reviews:

Brands by name

Popular brands