Operating manual - English
Twister II
Copyright Silca S.p.A. 2017
12
6
MACHINE REGULATION AND UTILIZATION
Before carrying out cutting operations:
• insert the proper cutter and tracer
• activate the spring system (if cutting dimple keys) (ch.7.4)
6.1
FITTING AND REGULATING THE TOOLS
Fig. 9
ATTENTION: turn power off on machine.
To fi t the tracer point and cutting tool into the sleeves:
1) Place the tracer point all the way into the left-hand sleeve and secure by tightening the grub screw (M) (Fig. 10).
2) Place the cutting tool all the way into the right-hand sleeve and secure by tightening the grub screw (M1).
Releasing the tools
Unscrew the grub screw (M) and (M1) to remove the tracer point and cutting tool from the sleeves.
M
M1
Fig. 10
