Silca Triax Pro, Operating Manual

Page: 27 / 114

4.2.2 R28 clamp for ENGRAVING keys and medals
The R28 clamp (Fig. 22) is prepared to house keys* and medals* to be engraved.
To open the clamp jaws (A3 and A4) and fit the key or medal to be engraved, turn the knob (S) clockwise.
Turn the knob (S) anticlockwise to close the jaws (A3) and (A4) and secure the object (key or medal) to be
engraved. On top of the 2 jaws on the R28 clamp there are positions numbered 0 to 8 which are used as a
reference and aid the operator in positioning the key or medal to be engraved.
Cutter to use for engraving: W146.
ATTENTION: (*) keys and medals must be metal. Engraving cannot be carried out on other materials
(wood, paper, plastic, ceramics…). (*) the maximum dimensions of the object to be engraved are: 38x40
mm (Fig. 24).
0
A3 A4 S
0
8
1
2
3
4
5
6
7
R28
Fig. 22
0
ABCDE
0
8
1
2
3
4
5
6
7
R28
0
8
1
2
3
4
5
6
7
R28
40 mm
38 mm
Fig. 23 Fig. 24
Operating manual TRIAX PRO
Copyright Silca 2016
21