Silca Triax Pro, Operating Manual

Page: 19 / 114

2.2 UNPACKING
To remove the machine from its packing:
1) Cut the straps and remove.
2) Raise the top part of the cardboard box.
3)
Loosen the screws fixing the front and rear brackets holding the machine to the pallet.
4) Use the special key to loosen the nuts on the feet by a couple of turns.
5) Remove the metal brackets and tighten the nuts on the feet.
6) Check the contents of the packing:
-
1 TRIAX PRO key-cutting machine
-
1 Machine documentation: operating manual, spare parts list, expert guide and warranty form
-
1 Power lead
-
1 Tool box
2.3 MACHINE HANDLING
Once removed from the packing place TRIAX PRO directly on a workbench; the operation should be carried out
by at least 2 persons.
ATTENTION: when lifting the machine take hold of the base only (Fig. 8). Never lift the machine by holding
onto the keypad support (Fig. 9).
Fig. 8 Fig. 9
YES
NO
Operating manual TRIAX PRO
Copyright Silca 2016
13