TARGA 2000
Operating manual - English
Copyright Silca 1999
15
5.4
Environmental conditions
To ensure that the best use is made of the TARGA 2000 key-cutting machine, certain parameters
must be borne in mind:
-
damp, badly ventilated sites should be avoided.
-
the ideal conditions for the machine are:
- temperature: between 0 and 40°C
- relative humidity: approx. 60%
5.5
Positioning
Place the machine on a horizontal surface, solid enough to take the weight (16,5 kg).
To facilitate operation and maintenance, install the machine with a clearance of at least 200 mm
on all sides (fig. 10).
Check that the weight of the machine is evenly distributed over the four feet; horizontal positioning
prevents vibrations during operation.
ATTENTION: ensure that the machine voltage is the same as that of the mains, which must be properly
earthed and provided with a differential switch.
Fig. 10
5.6
Description of work station
The machine needs only one operator, who has the following controls at his/her disposal (fig. 11):
-
Safety device (X);
-
Motor start button (N), placed on the left side of the key-cutting machine and incorporating a
lamp to indicate that the machine is live.
-
Carriage movement lever (A).
-
Carriage lever handle (B).
Fig. 11
A
N
B
X
