background image

INDEX

GUIDE TO THE MANUAL ......................................................................................................5

GENERAL INTRODUCTION.................................................................................................. S

1

TRANSPORT 7

1.1 Packing ..........................................................................................................7

1.2 Transport .......................................................................................................7

1.3 Unpacking ......................................................................................................7

1.4 Handling the machine  ....................................................................................7

2

MAIN WORKING PARTS  ................................................................................8

3

MACHINE DESCRIPTION ...............................................................................9

3.1 Technical Data  .............................................................................................10

3.2 Electrical system  ..........................................................................................11

4

ACCESSORIES PROVIDED  .........................................................................12

5

MACHINE INSTALLATION AND PREPARATION .......................................13

5.1 Checking for damage ...................................................................................13

5.2 Environmental conditions .............................................................................13

5.3 Positioning ...................................................................................................13

5.4 Description of work station ...........................................................................13

5.5 Graphics ......................................................................................................14

5.6 Separate parts  .............................................................................................14

5.7 Removing the blocks  ...................................................................................14

5.8 Connection to the mains  ..............................................................................14

6

REGULATION AND USE OF THE MACHINE  ..............................................15

6.1 Checking and setting  ...................................................................................15

6.2 Calibration ....................................................................................................15

7

Key cutting ....................................................................................................16

7.1 Key cutting  ...................................................................................................16

7.2 Using the accessories ..................................................................................17

8

MAINTENANCE .............................................................................................19

8.1 Replacing the cutting tool  ............................................................................19

8.2 Replacing the brush  .....................................................................................19

8.3 Replacing the belt  ........................................................................................20

8.4 Replacing the tracer point  ............................................................................20

8.5 Replacing the fuses  .....................................................................................20

9

DISPOSING OF MACHINE  ...........................................................................21

10

AFTER-SALES SERVICE  .............................................................................22

10.1 How to request service  ................................................................................22

Summary of Contents for Ilco Orion SMARTY 2000

























Reviews: